Simple Steps To Format A Hard Drive On Windows 10

Articles Jul 29, 2019 23:06

When you start using your PC, especially second handed PC, formatting the hard drive is very important. As old files from the previous owner might still be in there and take up some space, it's best for you to format the drive. We'll share you some guides on how to format your hard drive.

How to format existing partition using Disk Management

If you have a hard drive already configured with a partition, you can just format the existing partition to erase its content and start fresh with a clean drive.

To format a partition using Disk Management, use these steps:

  1. Open Start.
  2. Search for Disk Management and click the top result to open the experience.
  3. Right-click the new hard drive and select the Format option.

    Simple Steps To Format A Hard Drive On Windows 10

  4. In the "Value label" field, type a descriptive name for the drive.
  5. Use the "File system" drop-down menu, and select NTFS (recommended for Windows 10).
  6. Use the "Allocation unit size" drop-down menu, and select the Default option.
  7. Check the Perform a quick format option.

    Simple Steps To Format A Hard Drive On Windows 10

    Quick Tip: While performing a quick format wipes the drive faster, it doesn't check if the drive is damaged. On the other hand, when clearing the option, a full format will be performed, which not only wipes the drive clean, but it'll also check for bad sectors. It's an option that could take several hours, but it's a good practice to make sure the hard drive is in working conditions.

  8. Unless necessary, clear the Enable file and folder compression option.
  9. Click the OK button.
  10. Click the OK button again in the warning message.

Once you've completed the steps, the system will format the selected partition on the drive, and then you can start using it to store files.

Watch: Windows 10 - How to Reset Windows to Factory Settings without installation disc.

How to create and format new partition using Disk Management

If you happen to have a hard drive that was never formatted, you'll need to initialize and create a new partition before you can format it.

Typically, you'll know when a hard drive doesn't have a partition, because it'll not appear in File Explorer, and on Disk Management, it'll appear as unallocated space.

To properly set up a blank hard drive, use these steps:

  1. Open Start.
  2. Search for Disk Management and click the top result to open the experience.
  3. Right-click the hard drive marked as "Unknown" and "Not Initialized," and select Initialize Disk.

    Simple Steps To Format A Hard Drive On Windows 10

  4. Check the disk to initialize.

Maybe you're interested in 10 Brilliant Tips To Make Your Slow PC Runs Faster On Windows 7,8,10

  1. Select the partition style:

    • Master Boot Record (MBR) for hard drives smaller than 2TB in size.
    • GUID Partition Table (GPT) for hard drives larger than 2TB in size.

    Simple Steps To Format A Hard Drive On Windows 10

  2. Click the OK button.
  3. Right-click the Unallocated space, and select the New Simply Value option.

    Simple Steps To Format A Hard Drive On Windows 10

  4. Click the Next button.
  5. Under the "Simple volume size in MB" section, leave the default size if you're planning to use the entire hard drive to store files. Otherwise, specify the amount of space in megabytes that you want to allocate for the partition.

    Simple Steps To Format A Hard Drive On Windows 10

  6. Click the Next button.
  7. Use the "Assign the following drive letter" drop-down menu to select a letter for the new hard drive.

    Simple Steps To Format A Hard Drive On Windows 10

  8. Click the Next button.
  9. Use the "File system" drop-down menu, and select NTFS (recommended for Windows 10).
  10. Use the "Allocation unit size" drop-down menu, and select the Default option.
  11. In the "Value label" field, type a descriptive name for the drive.
  12. Check the Perform a quick format option.

    Simple Steps To Format A Hard Drive On Windows 10

    Quick Tip: If you prefer a full format, clear the quick format option. Just keep in mind that depending on the size of the drive, it can take hours to finish.

  13. Unless necessary, clear the Enable file and folder compression option.
  14. Click the Next button.
  15. Click the Finish button.

Maybe you're interested in How To Compress A FIle Or A Folder In Wins 10

After completing the steps, the new hard drive will be initialized, partitioned, and properly formatted.

If you're having trouble using Disk Management to format a hard drive, because of data corruption or other severe issues, you can use the DiskPart command-line tool to fix the problem.

While we're focusing this guide on Windows 10, the steps outlined above will also work on Windows 8.1 and Windows 7.

Watch next: Windows failed to start (The PC is not booting from the correct Hard Drive, 0xc0000225).

Source: https://www.windowscentral.com/how-format-new-hard-drive-windows-10

Related Topics